Home2018 (Page 6)

As part of my preps, water is high on the list of items I strive to ensure I have options and redundancy for. We have water stored in our home and rain barrels that can hold hundreds of gallons as well as a fairly large pond directly across the street from our house. But in addition to all of those potential sources there was one more that I hadn’t tapped into for years that I had been meaning to find a solution for.

We have a well on our property that hasn’t been used in at least 20 years. When we moved into our home it was already there, a small nub in the back yard surrounded by a little concrete pad and the remnants of electrical wiring. It had not been hooked up to a pump since before the people we purchased the home from had lived there. It was a potential source of water with no easy way of collection but we have always talked about using it to water the garden or supply additional water needs if our city water was shut off.

For years my wife and I had discussed the prospect of getting that well working for us from time to time but never did anything. Thinking of this resource from a strategic standpoint, I had always viewed this as a backup source if all hell broke loose and just hoped that I would find some creative way of making a bucket system with a pulley and of course finding clean water at the bottom of the hole if I ever needed it.

What are you one of those Preppers?

At one point I called a local well pump service man and asked him how much he would charge me to stick a manual hand pump in there like the kind you see on old movies or in Lehman’s catalog thinking that would be a great option. The first words out of the man’s mouth was, “What are you, one of those preppers?” and after I tried to convince him that I just wanted options for my well he started talking about how expensive they are (around 1K) and how everyone rushed to get those installed before Y2K and how everyone was crazy. He told me he could show me a simple tripod and bucket idea that would save a ton of money but never called back. I guess he didn’t want to fool with me.

So the well sat until recently and Gunslinger contacted me about performing a review of his manual well pump solution. The Gunslinger Quick-Draw Emergency Hand Well Pump seemed to be perfect for my plans of providing a water option using my long-neglected well. The pump is designed to be deployed when you need it and for a prepper, this seems like a good balance between preparedness and a dedicated, more costly well pump.

The Quick-Draw well pump comes almost ready to go right out of the box.

The Quick-Draw is just about ready to use right out of the box, all you need to do is insert the pump end section onto the bottom of the hose or that is the idea. The instructions provided are very clear and if you want more detail, Gunslinger provides plenty of set up and modification videos on their site.

Simply connect the bottom pump housing onto the hose.

The quick-draw well pump comes in preset lengths of 100′, 75′, 50′ and 25′ and I ordered the 75′ product because I thought my water well went down that far. I assembled the pump which is virtually all plastic pieces except for the brackets that hold the pump firmly to the well shaft housing and dropped it down into my well.

Feed the well pump hose into your well.

I wasn’t able to feed all of the pump hose. It went down fairly smoothly to a point and then some adjusting allowed me to feed it down another 20 feet or so, but I must have reached the bottom because the pump would go no further. Figuring I would just test the well pump without mounting it, I started pulling on the handle.

The handle moved smoothly one time but no more and I could feel the internal pex hose straining against the exterior plastic tubing. The instructions from Gunslinger clearly state that the hose has to be straight so I pulled the hose out completely and followed the simple instructions online for shortening well pump hose. I had to do this twice actually to get the length correct and I could have saved a little time by dropping some type of measuring device down my well. Even with having to shorten the hose, this only took a few minutes each time and was easily done with my trusty knife and a wrench.

Once I had shortened the hose sufficiently and connected the well pump to the well pipe for security again, the pump handle slid up and down very easily. It took me about 30-40 pumps to start pulling that water out of the ground. Pumping was simple and my daughter was with me monitoring the whole process so she could install the well pump if needed. Now that my pump hose is the correct length, really all that needs to be done is to connect the bottom piece, feed the hose down into the well, secure the pump with the clamp and start pumping. Simple.

Grid-down water pumping goodness!

The quick-draw doesn’t pull gallons of water out with each stroke of the pump, but it does a reasonable job and I can see this filling a gallon easily in close to a minute. For me, this is a perfect balance for prepping needs and I have capacity that I can store in my shed until I need it. Next, I need to have my water tested.

The Gunslinger Quick-Draw Emergency Hand Well Pump in 50′ length costs $280 and shipping is included in that price. Steel well pumps are 3 times that price and require some installation. Similar type of plastic well pumps I have looked at like Flojack and Earthstraw are easily double and sometimes triple the price of the Gunslinger and I would assume they have a similar set up and performance.

I think the Gunslinger well pump is an impressive piece of survival gear for the money and think this makes a compelling product worth considering if you have a well on your property and you are looking for a manual backup option for your water needs. Assuming my water is safe, this pump will give me the ability to provide water for my family regardless of the situation.

As part of my preps, water is high on the list of items I strive to ensure I have options and redundancy for. We have water stored in our home

When we are planning for our family’s safety, preppers employ a wide spectrum of ideas, plans and approaches to getting their family out of danger or protect them from danger in the first place. This is a noble goal and one that I myself strive to achieve in some way daily. When you are planning on surviving though, it is important to take a minute or two and consider the people you are trying to protect. If your grand prepper plans for keeping the family safe or healthy are for whatever reason abhorrent to the same members you are trying to save, what good is that?

Analyze your family’s strengths

When I first started getting into the subject of Prepping and learning everything out there that formed my thought process around threats, I was full of energy and ideas. I just knew I had the perfect plan to protect my family and I just needed the time and money to implement all of my ideas. Some of what I had hoped to do wasn’t really possible or practical with my family. For instance, I don’t live with Seal Team 6 so a highly dynamic, crack team of trained professionals wouldn’t be there to help me secure my home in the event of a collapse brought on by any number of natural disasters or man-made events. Now that I think about it, I am not sure I really want my wife to be able to kill me that easily…

Your family has strengths that you need to consider and this can apply to anyone. Just because you are the father of younger children, that doesn’t mean you are up the creek, but you do need to adjust your strategy and take advantage of these strengths. As an example, my wife is very smart and analytical. I try to run every idea past her that I have. This sometimes doesn’t go as planned but she has on many occasions pointed out flaws in my preps. Had I been Johnny Ranger and tried to do everything by myself, I would have made some pretty significant errors.

Make sure you plan for your families strengths while being mindful of their weaknesses.

Your team is more than yourself and as a whole you need to make it through whatever crisis you are faced with. Your children might be too young to take a highly active role in defense of your home for example, but they can do other things. Maybe while you are busy boarding up windows and doors, they can load magazines or gather supplies. I wouldn’t plan on defending against an army anyway, but your kids could be on lookout and report back using radio to other members. Maybe instead of giving them all rifles and expecting them to shoot the bad guys they would take care of the animals or smaller children or cook. Everyone who is past toddler stage can contribute to your family’s success.

Analyze your family’s weaknesses

There are good and bad traits in everyone and I am not excluding myself from this. For some reason I get irritated at some of the stupidest things and it doesn’t help getting mad at inanimate objects no matter how righteous you feel. As an example, sometimes when I am walking through my house in a certain pair of pants, they get caught on the door knob jerking me backwards or like yesterday when I didn’t have the right sized allen wrench to take the handle off a leaky faucet I got irritated. I didn’t throw chairs or scream, but I know I should have more patience and that could be a weakness in me. I know I need to work on that. If I am going to lead my family in an effective way, I want to analyze my personal hang-ups and develop a plan that mitigates those weaknesses or at least doesn’t rely on my not showing my ass at a crucial moment.

Your family has weaknesses too. For children the obvious are weaknesses that are through no failing of character like mine, but exist simply because they are young. Young children aren’t as strong, don’t see the bigger picture in most cases, tire and get scared more quickly. In a lot of cases, they are going to need more than they are capable of contributing to your survival efforts so any plan that assumes they will barrel head long, full speed ahead with you into the abyss might need to be rethought. Like the guy building the tree house, you should first figure out if anyone in your family is afraid of heights. Do you plan on going down to your bunker? Is anyone claustrophobic? Is your plan to bug out on foot for several, maybe dozens of miles? Are your family members going to be able to go that long?

One of our readers who have small children has already purchased a game cart that usually helps you get deer out of the woods much easier than dragging or carrying them. This is his plan for his children and bugging out. If needed, he will stock his game cart with gear and throw the kids on top and I think this is a great idea. Is it the best plan? No, but I think it is obvious that he is thinking about his family and knows what he will need to consider if the time comes when he needs to travel long distances on foot.

Plan for the future

Another aspect of planning is for the future. If you are a young family do you plan to have more children someday? Maybe children arrive and they weren’t in the plan. It may be harder to visualize something horrific like a disaster and small children but it happens every day. Your plans for living out in the woods might work for two healthy and competent people, but what if eventually there are three of you?

Maybe the lesson in this is that life changes and you have to roll with it in order to survive and thrive. Our plans are nothing more than a rough draft – sketches on a napkin that sound great until life steps up and changes the rules for you. The more prepared you are the better you will be able to pivot when changes cause your formally brilliant plan to end up in the trash pile at the end of the street. Plan for people to get a vote too because your ideas are only as good as the situation you have planned for and everyone else’s willingness to go along with them.

When we are planning for our family’s safety, preppers employ a wide spectrum of ideas, plans and approaches to getting their family out of danger or protect them from danger

Building a pickup truck sleeping platform can be very beneficial for, not only camping, but for use as a bug out vehicle.  For those who don’t know what a bug out vehicle is, it is used to quickly get to a safe location—whether a disaster occurs or there is just economic and social instability.  If you can’t afford an RV or a cab-over camper a pickup truck sleeping platform may be your best option.  The most expensive item you will need to make this effective is a camper shell.

Benefits of having a pickup truck sleeping platform versus a tent:

  • You will stay dry when a tent would be flooded.
  • It is much warmer than a tent.
  • You do not have to do any preparation to sleep as it is already built and ready to go.  In other words, no pitching a tent.
  • It is easily and quickly mobile; no rolling up sleeping bags or putting away tents.
  • In a pinch you could sleep in a parking lot without being noticed.
  • The foam or mattress is much more comfortable than the ground or small sleeping pad.
  • It can be made to fit your needs, and can have a lot of storage space. It can even be made to have electricity, water and heat.

Tents could be beneficial if you needed to hike and camp in an emergency. This would be the only downside to having a pickup truck sleeping platform, as it could be difficult to get completely off-road and isolated. It can only go where your truck goes.  The solution to this problem is to have a small, cheapie tent in the truck at all times.

Where do you start with a pickup truck sleeping platform?  The first thing you will need is the pickup truck.  This is really all about preference of brand, mode, size and its function.  The bigger the truck and bed, the more room you will have.  The pickup truck I have used is a 2002 Chevy 2500hd extended cab short bed automatic with a 6.0 liter gas engine.

After you have the pickup truck, you will need the camper shell to keep you dry, warm and prevent your possessions and sleeping platform from being stolen.   There are quite a few options in this department; the one I used is a Leer, one of the most popular camper shells on the market.  If you are willing to buy used, you can check craigslist, ebay, and your local classified ads.

You now have your camper shell and truck, but you don’t want to sleep on the pickup bed as the metal is cold and uncomfortable.  Here is where the pickup truck sleep platform comes in handy.  There are many ways to design and build your truck bed platform, but I will show you how mine looks.  My truck bed platform is quite complex compared to the common ones I have seen, but it is built with easily accessible parts.

Pickup Truck Sleeping Platform Parts List

The parts used to build the platform are as follows:

All the stuff needed depends totally on the design, bed length, and complexity of the truck bed sleeping platform you would like to make.  Many of the items on the list are things you may have laying around or can easily and cheaply get at a hardware store.  The automotive carpeting and upholstery foam can be found online or at an upholstery or automotive upholstery shop.

The first step to making your pickup truck sleeping platform is to brainstorm the design, the functionality and the features you would like.  Make sure everything will fit and is workable with the space.  Then draw out a rough sketch of how it is going to look.  The features I felt were most important were a comfortable platform to sleep on, storage and easy uninstall.

There can be many different approaches to the design.  A very simple design would be to run a metal L bracket all the way down both sides of the truck.  You would then put 2 x 4’s across the gap and ply wood on top of that to make the platform.  Then you could either use the foam and carpet to upholster it or just lay an air mattress on top of it for comfort.  This would give you a full bed width of storage under the sleeping platform.  This design gets the job done, but doesn’t look great and does not have many features.  The next type is one you would build with a platform sitting on top of boxes made from wood.  It could have drawers that pull out from inside the boxes (these boxes would be the full length of the bed).  This design is quite complex and looks clean, but has some drawbacks.  It can be heavy and is not easily removed.  The design I used is quite easy to make, has some great features and is very easy to remove from the bed. Below are the pictures of my pickup truck sleeping platform and how it fits together.  This will be easier to show than explain.

After you have the design in your mind or on paper, you need to take measurements.  You must make sure that your design accounts for the wheel wells (if it is a step side you will not have to worry about this) and any other characteristics of the bed that are not square.  Draw each piece that you will need to cut out for each side of the platform.  Both sides of the platform can be made identical or almost identical so you should have two of each piece.

When you have cut the pieces out now you can actually start putting it together.  To attach each piece, you can use heavy duty staples or finishing nails.  You will also want to use wood glue to hold it together more effectively.  When you have the pickup truck bed platform together and it looks as you had envisioned, put it in the back of the bed to see if it fits correctly. Make sure that all of the wood is together and will fit into the space before you even start to upholster it.

If your bed platform fits correctly now is the time to start upholstering it.  I figured this would be very difficult, but it was mostly just time-consuming.  The most difficult part of the upholstering is getting the corners to look correct.  I just went to YouTube and found many videos that showed how to cut and fold the carpet to make the corners look correct.  On the pieces of plywood that had foam, make sure to make the foam just a tad bigger than the board because the foam may compress down some, and when the foam is bigger than the board, the carpet can be tighter.  To attach carpet to pieces with foam, I just went crazy with staples to make sure it held.  For the side and front pieces, I used the adhesive and sprayed the whole thing.  I then stapled the back to hold the carpet tight. You want to ensure that you purchase enough carpet and foam.  Remember the carpet has to wrap around the backs of every piece to guarantee that no wood is showing.  You will have to cut the carpet a bit longer than the wood (depending on the piece) to do so.

When you are done and you feel the pickup truck bed platform is put together correctly, install each piece in the truck.  So for about $700-$1000 (including the camper shell) you can have a great camping rig that you can be proud of. Additionally, a camper shell and truck bed lock are essential for keeping people from stealing your items.

Pickup Truck Sleeping Platform

Some additions I would have liked are as follows:

  • deep cycle battery to provide additional power- Make sure it is gel cell or AGM so you don’t breath in the fumes
  • battery isolator to keep both the starting and accessory batteries charged
  •  An inverter to provide 120 volts of electricity to provide A/C power
  • water tank with fresh water for showering or cooking
  • solar panel on top of the truck to keep the battery charged when the vehicle is not running
  • A heating source

Some things I have or will put in the storage areas of my pickup truck bed platform are:

Building a pickup truck sleeping platform can be very beneficial for, not only camping, but for use as a bug out vehicle.  For those who don’t know what a bug

If you have as one of your concerns a total collapse in society regardless of the reason, there are people out there who will tell you that you need to have knowledge or skills you can sell. Why is this? Let’s take the example scenario of an economic collapse? If there are no jobs as a customer service representative or a social media consultant; what will you do to make money? What will the people who traded stock do? What about people who sell cars? If we are in a true economic collapse, the only people who can be logically expected to survive are people who possess goods or services someone is willing to buy or barter for or those who have survival skills.

What do I mean by survival skills? Do I mean someone who can navigate by the stars? No. Do I mean someone who can make a fire with a bow saw? No, although that is a really great skill to have. I am talking about skills for a certain limited set of trades and more importantly the skills we have all long forgotten to a major degree. In this post I want to talk about my ideas for the best, most pertinent survival skills you need to consider if you are prepping your family for any event where we as a country or even our world can’t dig us out of with a tractor. When the real end of the world as we know it arrives, what will you need to give you the best chance of making it through?

What Skills do you need to have?

That is a good question if you ask me because I have seen a lot of advice from people who on the surface seem to have a great idea or 20. The usual suspects are what might be considered our pioneering skills and I won’t discount those completely, but I will give you my thoughts and welcome all of the feedback you have in the comments below.

From the perspective of a total economic collapse, war, biological outbreak, EMP attack we will be looking at such a seismic shift in our lives that even the very concept of commerce could be set back years maybe decades. Having goods or services people want is a nice idea, but what if nobody can afford it? What if nobody knows you have these goods or services? You won’t be able to advertise in the Yellow pages anymore and your Etsy store might not be online anymore. Classifieds in the newspapers? Maybe your town will have a bulletin board where you can post an ad you make that highlights your services to the community. We simply don’t live in small towns with a main street and not much else anymore. You can’t hang your shingle out on the front porch and expect a lot of drive through traffic so how will the word get out so that people come to your “store” to conduct business?

Our society has developed to a point where the old models of commerce have changed. Imagine a world with no cars or few of them. If we have an economic collapse that renders fuel out of reach of the hands of most people, you won’t be able to drive to the next town to get some work done. Everything is going to change.

Are you trying to make a living at this, or live because of this?

I think the perspective of most of these lists on Survival blogs is from the standpoint of what can you do to earn money if we go through an economic collapse. What will you do for a living if the company you are working for now suddenly closes? If we have another stock market crash and hundreds or thousands of companies close because they can no longer purchase the raw materials they need to create products, or the products they do create aren’t sold anymore; what will you do for a living? How will you feed your family if you can’t afford the food in the grocery stores? What if there is no EBT system because our Government is broke? What if the computers are down?

The problem of an economy that is almost completely based on Services is that if people don’t have money for these services, you could be out of a job. Think of just two small examples of lawn services and maid services. These two industries exist primarily because people make enough money that their time is worth more to them than the cost of hiring someone else to do these two jobs. When you start seeing companies close and people are out of work, the two industries like lawn services and maids will disappear.

The skills I am considering aren’t necessarily going to earn you a living, but they could. From the standpoint of a total societal collapse, I am thinking about not what I can make a living from, but what skills are going to keep me living?

1 – Growing your own food

This is the number one skill I believe you can have. For starters, if there are no jobs, there most likely won’t be any grocery stores. Having a garden on land that you are living on is the surest way you can take the responsibility for feeding your family into your own hands. Start a garden now because this isn’t a skill you can easily ramp up on after a collapse. It is one thing to add additional crops, but it is another thing entirely to face an empty patch of lawn with a bucket of seeds in December. Knowing how to save seeds is also important because if the collapse is bad enough, the local Wal-mart might not be open anymore.

2 – Obtaining and filtering a steady source of water

Water is more important in terms of living than food is, but growing food is harder for most people than finding water. After your garden is growing, start a project of collecting rain in rain barrels or digging a well. Just having a 50 gallon barrel in your basement isn’t going to be enough in a true collapse scenario. Once you have water, you will need to treat it unless it comes from a clean source underground.

3 – Securing your home and possessions

One of the major problems of any collapse is the other people you have to worry about. As we saw in Doomsday Preppers , there are opportunistic scavengers out there who have no remorse when it comes to separating you from your supplies. You have to have the skills to defend your home and family from people like this. Good training from someone who has actually lived through a war can be found at the SHTF School. The other side of this could be caring for your instruments that will assist you in securing your home. Basic tools and parts to maintain weapons are essential. If your expensive rifle with all of the sexy hardware on it breaks a firing pin, it becomes a club.

4 – Providing intermediate level medical care

Food and water will keep you alive, but at some point everyone gets hurt. The hope is that injuries are minor, but they could require additional first aid and possibly antibiotics to treat infection. At a minimum, a well stocked family sized first aid kit is essential. I have several just in case. Next up you need to know how to treat wounds like burns and cuts. Having a supply of fish antibiotics can be the one thing that keeps you alive when an otherwise minor cut could kill others in a post collapse world.

5 – Operating alternative power

One of my long term goals is to be completely self-sufficient from the electrical power grid. I do appreciate the irony in that statement seeing as how I run a blog, but the power we need to live off of in our daily routines could come primarily from the sun. An entire home solar system isn’t cheap at all, but you can start small. A couple of 100W photovoltaic panels, an inverter and several batteries or even a simple solar system could give you an advantage in a survival situation. Having the skills to help set these up for people could make you doubly valuable.

6 – Raising livestock for food/Hunting

A garden is a great way to stay alive and some of my vegetarian friends would say that’s all you need. However, meat is something our bodies naturally need and you can get this several ways. Preppers usually go for chickens, rabbits, sheep and pigs in terms of livestock because they are all relatively easy to raise and produce good meat. Hunting is another option and gives you a great survival skill set you can use in other situations. Knowing how to butcher and eat what you catch is very important also. Aquaponics is another method that not only gives you a great source of fish, but can also fertilize the garden as well. This is one of those skills that will take a little know how and preparation prior to the grid going down unless you live near a big PVC factory and a tilapia farm.

7 – Communications

Being able to know what is going on in your city, state, region or even country is important. A lot of people have shortwave capable radios that can receive broadcasts from stations overseas, but if you want the best of all prepper communication options, you need to get into Ham radio. The basic equipment to start with Ham is relatively cheap but is possibly your best bet in anything other than an EMP scenario of staying in contact with others and relaying information to your group. Of course, you can build Faraday cages to shield your electronics like this for extra protection.

8 – Jack of All trades

The jack of all trades lumps a lot of other skills together because I think you will be using these more for yourselves than selling this service to other people. Things like basic carpentry skills; welding, plumbing; electrical work and even animal husbandry come to mind. I don’t know that I can envision anyone starting their own plumbing company for a while after the grid goes down but it is possible. What I can see though is a pipe busting in your house and you not having any money to call a plumber. Other skills fall into this like making soap, sewing, leather-working or knitting and cooking. None of the realities of life go away in a collapse, how we deal with them changes.

9 – Forager

This I put lower on the list because I do agree it is a valid way to survive, but of all the items above, I would want to rely on this least. Knowing the local varieties of plants, fruits, leaves, roots and nuts are edible can certainly augment your diet and keep you from starving. I know that there are several books out there that go into this subject to a high level, but I personally would rather pick something out of my garden that I know what it is than rely on a picture or description of something that may kill me.

10 – Weatherman

No, you won’t have a job standing in front of a green screen holding a remote control showing the weather fronts moving across the plains, but knowing how to forecast the weather is definitely a skill that could save your life in a few ways. For instance, the tornadoes that struck many states would have been more deadly if people hadn’t been warned by the news. What if there were no news crews watching super Doppler radar? You will need to know how to forecast weather the old fashioned way to protect your crops and animals if it is going to snow or freeze.

These are just the ones off the top of my head, but I am sure you all will have more. I’d love to hear your ideas for the best survival skills in the comments below.

If you have as one of your concerns a total collapse in society regardless of the reason, there are people out there who will tell you that you need to

For anyone lucky enough to have a shallow water table without bedrock, a do-it-yourself driven well saves thousands of dollars compared to having a bored well drilled. Under ideal conditions, a well can be driven in a few hours and fitted with a pitcher pump, creating an uncomplicated, inexpensive backup or everyday water supply.

Sand point wells (a.k.a. well points or driven wells) were once widespread, but, like so many other unsophisticated tools, went to the scrap heap once electricity, drilling rigs and volumes of deep water became available. “Mechanics of the Household” of 1918 describes sand point wells’ easy installation and maintenance as if every household should have at least one. Just as many Americans have never saddled a horse, used a crosscut saw, canned sauerkraut or sewn with a treadle machine, many do not know about sand points. Yet, we should.

Mechanics of the Household: A Course of Study Devoted to Domestic Machinery and Household Mechanical Appliances

Many professional experts now agree the severity of our extreme weather is intensifying, fossil fuels really are irreplaceable, and energy costs are escalating. For a few hundred dollars, a hand pump and driven well could be a lifesaver, and not only for rural folks. Installing one may be less complicated than you think.

Find your water table

Sand points are used in coarse sand or gravel. In clay, earth augers function best. In stone or hard formations, or if water is very deep, wells are drilled. The water table (upper level of saturated soil) fluctuates seasonally. In wet periods, the water table may be above ground. In drought, the water table may sink below the well bottom, “going dry.”

To learn about your water table, contact your county’s water district or state’s natural resources department. Well drillers and neighbors with sand points can tell you about their well depths and yields. Online, check with Water Systems Council or U. S. Geological Survey. You may also need a permit.


How to install a sand point well

Through the years, Mother Earth News published several good articles about sand points, including “How to Dig a Well” in 1970 and “Water Development for Homesteaders,” in 1971 by Ken Kerns, who says, “If driving conditions are good, a 4-inch diameter casing can be driven to as deep as 50 feet.” Readers Digest “Back to Basics” book of 1981 says depths of 150 feet can be achieved “with equipment.” Typically, however, driven wells are installed no more than 30 feet deep with a 1 1/4” or 2” pipe and simple tools. Also in Mother Earth, Steve Maxwell writes in 2012 in “Homestead Water Sources and Options” that 50 feet can be reached with perfect hydrogeological conditions.

Basically, a driven well is installed by hammering a sand point and pipe directly into the earth to tap groundwater that may be literally right under your feet. The sand point, a perforated pipe of 24 to 60 inches with a heavy steel point (the water intake), is screened to keep out larger dirt particles. The screen, available in various opening sizes depending on soil, must be strong enough to withstand hammering and abrasion. Two good sources for installation information include Merrill Manufacturing and Wisconsin DNR.

Drive pipe, couplings and cap

The drive (rigid) pipe, or well casing, must also be heavy-duty. Threads of ordinary thin-wall pipe and couplings may strip or shear or the pipe may break at the threads. A drive cap protects the threads. It may be helpful to use a short section of rigid pipe and coupling below the drive cap, which is easier to remove than the cap after repeated blows.

Hammering methods

This pipe is hammered into the ground by repeatedly dropping a heavy weight (a driver) onto the pipe generally in one of four ways: The driver is guided inside the pipe to strike the pipe cap, the driver is guided outside of pipe (as pictured here) to strike the cap, the driver strikes a clamp outside the pipe, or a long, thin driver strikes the sand point base inside the pipe. The last technique eliminates compressive loading on the pipe and makes heavy drive pipe unnecessary. A maul can be used, but besides being grueling, is difficult to drive squarely.

The weight can be driven by hand using a tool resembling a T-post driver, or the weight can be raised and lowered with a tripod and pulley. Or, if dropping a weight inside the pipe, the weight can be lowered with a rope and no tripod. Just be sure to tie off the rope securely so it is not accidentally dropped down the well (this is from personal experience with another project).

After the first pipe is driven into the ground, the pipe cap is removed and another section of pipe (with threaded coupling and pipe compound) is added. It is easiest to work with 5-foot pipe sections. If using 10-foot pipe and a T-post driver, first dig a 3-foot deep hole to stand in as the pipe is driven down. This hole must later be filled. Another option is to stand on a ladder or platform as sections are added. Again, this can make hammering awkward.

 

Hitting water

To determine when you have hit water, lower a weighted string down the pipe. You will hear when it hits water. Drive down about 5 more feet to allow for seasonal water level changes. Do not drive down too far or you may push your sand point past the water-bearing formation. Leave enough pipe extending from the ground to be at a comfortable working height with the pump you intend to use, about 2-3 feet. This also helps protect the well from surface contamination. The system also must be flushed to remove dirt.

Next, attach your pitcher pump or suction pump. Begin pumping. Within a few strokes, you’ll have water coming out the spout. The muddiness will disappear in time.

Uses for sand point wells

According to “Self-Help Wells” by the United Nations Food and Agriculture Organization, sand point wells have many uses. For instance, while the well diameter is normally small and the yield relatively low, several driven wells may be coupled to a single pump. Because driven wells are quickly constructed, they may be used temporarily and pulled up when no longer needed. Driven well points can dewater excavation sites. A driven well point may be used to finish a hole that was excavated to the water table by another method such as an auger.

 

 

Investing now in something as simple as a sand point well, if at all possible, is wise. After all, you can only store so much water.

For anyone lucky enough to have a shallow water table without bedrock, a do-it-yourself driven well saves thousands of dollars compared to having a bored well drilled. Under ideal conditions,

Livestock keeping requires some research. It seems obvious, but it’s apparently not. It really merits researching in great depth, because there are a lot of investments and there are some issues that regularly crop up, having somehow have escaped a fair number of the people who choose to get livestock. I developed this article because I’m running into some of the same issues, regularly from people who really ought to know better. This is basically a primer on those situations. The information is not hidden, but seems to somehow end up overlooked – repeatedly.

I’m going to hit a few things that I run into (regularly) in quick little bullets. They’re tips for animal safety, the protection of genetic lines (ours and also a buyer’s), and successful breeding. They may be taken at face value, or they’re points for research.

I don’t mean to insult anybody’s intelligence. Some of them just keep repeatedly cropping up. With any luck, old hats will read it as well – if nothing else, maybe for some commiseration. I’d really like them to add the trends they see as well, though. The more information available, the better off all livestock keepers will be.

The Biggies BLUF Style

First off, I’d like to say: Do the research. This article and every other TPJ article about livestock in general and specific species and breeds should only be part. “Back To Basics” is only a primer. There are too many resources, completely free in many cases, for folks to end up as overwhelmed as they sometimes do.

Second: Go buy one of the type you’re going to raise or breed, just one. A spring kid, a rabbit, an aging-out hen, even a calf – although I suggest the smaller animals. Care for it for a season or longer. Then slaughter it. If you can’t, there’s only one animal eating you out of house and home, not a pair or a handful that can continue to multiply until it’s out of control. Even if you hunt, even if you slaughter poultry, make sure you can do it with the next livestock type – a lot of people can’t.

Hobby Farm Animals: A Comprehensive Guide to Raising Chickens, Ducks, Rabbits, Goats, Pigs, Sheep, and Cattle

I mention these two because I’ve volunteered for livestock rescues, I consult on sustainable systems (which include livestock), I’m on several forums, and I have personal relationships with livestock keepers. I have run into livestock costs and numbers getting out of control in numerous ways.

Rescues end up taking on the burdens in a lot of cases – when it’s just too much work or too much effort, too much expense, when it’s too hard to kill and eat an aged-out hen or the fluffy bunnies, when things spiral so long that the whole experiment fails and people lose their homesteads.

So beginners and expanding keepers: Start small – very small.

The Birds & The Bees

Sperm wilts in Summer. This is especially true of rabbits, who already face a lot of physical stress from heat. Litters will be typically smaller and there will regularly be fewer fertile eggs in the hottest periods for all stock. In some cases, you’ll need to plan more frequent and longer exposures to studs to have a pregnancy take.

Hens make eggs. They don’t need males to do it. Males are only needed to make more birds.

Dairy animals need “freshened”. Cattle, sheep, llamas, yaks, camels, and goats…

A.) Must have a baby (and thus be bred) before they make milk.

B.) Only produce that milk for a period of months before it dries up, and they have to have another baby.

Animals lack sexual mores. Livestock has no qualms about inbreeding with parents, siblings, grandparents, and close cousins. Wildlife ends up spread out and thus genetically diverse by numerous mechanisms. They cover more territory than domestic equivalents, and in some cases – like science is proving for wild ducks – they’re rampant adulterers even when forming seasonal or lifetime partners. We take that away from livestock. It can lead to serious genetic faults.

Livestock breeds early. By species, livestock can be breeding by 3-5 months of age. Failure to identify and separate or neuter males leads to inbreeding and overpopulation.

Separation is necessary – breeding I. Livestock will mate again as soon as they’re able. This leads to worn-down females, as well as overpopulation.

By their size, it’s easily possible that these rabbits have all reached sexual maturity – which means half or more of these animals could be gestating another 6-12 rabbits each. If they’re a mother and kits, especially if they’re not handled and examined regularly and a male hid his limas for a while, it’s not just the potential 48 new hoppers. It’s also inbreeding.

Castrating hoofstock creates options. Once altered, especially young, male animals are no longer a threat to the studs, or to our genetic lines and feed/housing budgets. They can stay with sisters and mothers, or go be a stud companion. They can also leave our properties, even if they come from faulted genetic lines, because they’re no longer a threat to others’ bloodlines even if they prove too cute/clever to slaughter and become a pet.

Neuter/Castrate early I. Testes will drop in a matter of days or weeks. The longer we wait, the more the at-home tools to castrate cost and the fewer options we have. By 2 months, some species are already getting too big for some of the less-invasive, non-surgical methods, and by 4 months, anything non-surgical is usually off the table.

Callicrate Smart Bander Kit

Neuter/Castrate early II. The earlier we alter male mammals, the easier it is. One, smaller is easier to wrestle. Two, there’s less time (and pain) involved in either crimping or banding a small mole than there would be for crushing off or wrapping a rubber band around a finger and waiting for it to rot off. Same deal with testes.

Separation is necessary – breeding II. Males are really into the passing down of their genetic material, and they will bloody and kill each other to do so. Wildlife doesn’t fight to the death over sex because the losers have enough room to run away. Livestock doesn’t (usually).

Separation is necessary – breeding III. Stud pigs and rabbits will kill off even their own young, and mothers will attack other pigs or rabbits and the young of a previously peaceful companion. They want the chance to mate again, or to eliminate competition for resources for their own litters or possible threats to their litters (it’s instinct).

Friends are fine. There’s nothing wrong with combining studs or grow-outs from different species while separating them from their original herds, or keeping the cow (and her calf) with the ram. They’ll gain valuable socialization. They can also share in the protection of numbers and combined body heat.

Limit unaltered males. It helps reduce the competition. That can lead to quieter, more peaceful barnyards. Especially with chickens, at high ratios of hens to roosters, you’ll find roosters are less sexually frustrated (and more tired), and thus less like to attack vehicles, other animals, and people.

Breeding affects female health. Pregnancy and lactation take a physical toll on dams, even with proper feed. So does egg production. Even though most livestock mammals can become pregnant again while still nursing the last young, it’s not always the best choice. A break in the cycles for recovery is of huge benefit for both poultry and mammals. Especially with mammals, we can gain years of useful life by providing rest cycles.

Dairy Drive-By’s

Sample goat milk before you buy. Not just any goat milk; that doe’s. If it’s not possible to sample the milk of the doe you’re getting, sample her mother’s and sisters’. While some breeds vary hugely animal-to-animal, most will have some similarity to their nearest relatives, especially if the stud line is the same.

Separation is necessary – Bucks effect milk. Lots effects milk flavor, from breed and feed to how fast we can cool it off, to a tiny little amount of dust.  But bucks really do contribute hugely to that goaty flavor.

Separation is necessary – Milking.  If we want to milk once daily, we can separate overnight after the first milks finish. If we want to milk twice daily and bottle feed numerous times a day, we can separate as soon as the colostrum finishes.

Separation is necessary – Weaning. Livestock will not usually forcibly wean their own young until they are near birthing again or naturally dry off. Even then kids/calves/foals will sometimes try to continue to nurse – even off other dams. This creates undo stress on the dual-nursing mothers, and competition for the newborns losing the highest fat and highest production milks.

Triplets are trouble – the birth. Sheep seem to handle triplets like champs, but goats and especially cattle regularly end up needing help with them – or with the last one, at least. It’s not uncommon for that third to be stillborn, or unable to nurse a first time.

Triplets are trouble – the kids. Between bottle feeding and super-productive dams, there are plenty of survivors. However, one of the triplets is sometimes seriously stunted, and due to competition for colostrum and high-fat milk, is likely to lag behind and be more susceptible to illness for life. Conversely, sometimes one kid is significantly larger than both its siblings and will take a lion’s share, leaving both behind the curve as they split the remains.

Triplets are trouble – the dam. I know people who won’t burden a doe with a third kid, because even if she has enough milk early, it will put enormous strain on her body and she may not be able to maintain that production when they get to the pre-weaning stage and are taking quarts off her. I also know people who milk colostrum and early milk for runts, then bottle feed a different mother’s milk to get enough volume for all three. Time available, the presence of other dams, whether we want to share that much milk for triplets (or cull early) all impact our decisions, as do our future herd needs.

Chickens Are Vicious

(Newsflash: So are geese.)

Roosters are lean & active. The earlier we harvest our male birds, the less tough and “gamey” the meat will be – and the less disruption from excess roosters we’ll deal with over weeks and months.

Roosters are rough lovers. Even within the unaided egg season, hens can use a break from roos. Roosters break and pull feathers as they mate, and their favorites can end up pretty bedraggled. Unfortunately this leads to…

Hens Peck Injuries. Chickens will keep after a flock mate with a visible wound or bare patches of skin, reopening and enlarging injuries, and can end up killing them.

Chicken Saddles & Blue Dot can help. We can cover a love-torn or injured bird in a chicken saddle (or sock sweater for young/small birds) and we can treat with a spray (which leaves blue dots). Ideally, we also use them on uninjured senior animals. If all (or half) of the flock also sports saddles or blue dots, the flock won’t focus its attention on the oddball, and the oddball has a chance to recover without separation.

Separation is necessary – Injuries. Chickens especially may need separated if they have a serious injury. All livestock may need a smaller pen or box to provide recovery, limit activity, or so they aren’t taken by predators while injured.

Chicks need protection. Chicks commonly need heat lamps, special food, and water they can reach. They also slip through smaller cracks, are susceptible to damp grass and cold ground, and fit in more mouth sizes. Whether we incubate and box chicks, or provide them with a broody hen, they need some help.

Chicks can be left in a flock. If a broody hen is of high enough seniority, and a flock is relatively small (under 10-18), hens can raise their nests right there in the existing coop. Otherwise, multiple hens that will sit nests within 4-6 weeks of each other can be removed to an adjacent coop. Being adjacent, having high-ranking, dominant mothers, and being in higher numbers can ease…

Pecking Order – It’s a real thing. It’s when birds use pointy beaks to peck others and establish their dominance. It gets brutal.

Integration of flocks takes time. One, separated and new birds need to be exposed to the flock through a fence or crate for days and weeks, not hours. Two, new and re-introduced birds really need to be of compatible size with flocks, especially big flocks. Otherwise, birds will be injured and-or killed.

Roosters don’t share well. Sometimes birds raised as brothers will share a flock, just like lions sometimes work in pairs. Usually, there’s fighting. And if a stud is kept with hens, and sexually mature baby roo’s are outside that fence, they will …

A.) Fight through the fences.

B.) Crow challenges constantly.

C.) Find new and creative ways to get inside the fence to the hens/rooster.

D.) Regularly become aggressive/more aggressive with other living and inanimate beings. Good times.

Down the Rabbit Hole

Some rabbits get along. Many don’t, especially rabbits accustomed to life in their own cages, and rabbits that aren’t spayed and neutered.

Breeding pairs need introductions. You arrange hutches so that a male can ideally be between two females, so his hutch slides and overlaps two females’, or leave empty spaces he can occupy for at least a couple weeks. That way, they’re accustomed to each other when they’re plunked in together.

Bunnies need buddies. They’re social creatures, just like dogs. Adjoining hutches allows for social interaction, as well as the potential for combined body heat if temperatures dip.

Females go to males. Neutral ground is iffy, but a male entering a female hutch can lead to…

A.) Distraction, with the male sniffing and marking instead of crooning Barry Manilow.

B.) The female taking offense to a male rushing right up to her.

C.) A female taking offense to a male poking through all her private spaces (especially if she’s raised kits in there and has a permanent box).

Bunnies need watched. Even if introductions and mating went well, sometimes you want your own space back, or somebody’s toes get stepped on. Hot weather makes everybody more cranky, too, and rabbits are no exception. Bunnies do their business, then get separated again.

Feeding – Them & Us

Feed is expensive. Whether we’re feeding off forage that takes time to recover, or buying sacks, there’s a cost associated. We need to know how much animals eat, and how many we can afford, before we create situations for breeding.

Meat animals are for eating. Don’t breed animals until you’ve tasted that species’ meat, and don’t breed animals whose meat you don’t like. (Riiiigghhtt???)

Harvest meat by size/age, not season. Big animals might lend themselves to waiting until after frosts, but when we’re feeding ourselves or other livestock off what we raise, we don’t have to wait for some magic season any more. In the case of chickens and rabbits especially, just a month or two delay greatly affects meat quality and flavor.

Eat some early. Doing so can save money on feed and wear on pastures, lower water hauling in late summer, and prevent aggression or breeding within the confines of limited infrastructure and labor. Just because typical butcher weight is 100-350# for pigs doesn’t mean we have to hold a whole litter for 6-9 months, especially the males. Some species lend themselves to waiting at least a while, but we can select 28-day poussin or 3-month pullets, lamb and kid and veal are traditional feasts, and suckling pig is a treat, whether it’s truly <8 weeks or we’re harvesting tender vittles once a month until the last few are freezer-filling beasts.

Nutritional needs change. As animals progress through their life-cycles, the nutrients they need change, as do the amounts of feed they need. Feeding everybody expensive game bird starter or lactating-female levels wastes money.

Feed type matters. Nutrients in bagged feeds & supplements and in pasture/forage/fodder vary, and affect health as well as the time to production or harvest.

Not everybody grazes. Ducks aren’t really grazers at all. In the case of free-range or foraging fowl, the accessible sources for feed changes by age, just as it does for wild birds like quail (quail lifecycle habitat is an excellent research point for creating pasture for poultry).

Llama grazing with sheep.

Worms steal nutrients. Parasites take from our animals. Regular deworming can prevent it. We can also rotate pastures. It limits re-exposure. It also allows pastures to gain height, which impacts hoofstock – worms occupy lower levels with the feces; if the livestock is grazing well above that level, it can break the fecal-oral route and lower belly loads.

Forage-based eaters are different. Free-range, pasture-fed animals that forage significant portions of feed are slower by as much as half-again or twice the time it takes commercial-diet fed animals to reach target weights, and production can be lowered for eggs and dairy as well. They’re also going to be leaner, and meat and eggs will change flavor seasonally.

Predators eat, too. Also, accidents happen and animals roam. Proper housing and fencing – before we bring home livestock – is vitally important. “Proper” varies by species and sometimes breed, and by climate. It’s also affected by rotation plans, keeping style, and the threats within our property and from our surrounding areas, or the natural barriers and safeties we can introduce, to include Livestock Guardian dogs, donkeys and llamas.

Not-So-Short Primer

So that’s the Big List of Bullets that made the cut for sharing. There are others, but I tried to come in under War and Peace, and the others come up more sporadically.

The over-breeding, misconceptions about which livestock needs mates and how often, when we harvest animals, and the inbreeding are biggies. Overpopulation due to males and females in constant exposure, and due to owners’ inability or unwillingness to cull flocks and herds also crops up – constantly, even among manly men who have deployed as grunt infantry and who hunt very similar deer, quail, turkey and duck. I also see a lot of people miss the opportunity to cut feed costs for other livestock or companion animals by using gluts of eggs and milk or meat they don’t want (goats), or who don’t *really* handle livestock and then run into problems moving and vetting them.

Hopefully, there was a nugget in there somewhere for almost everyone – and if not a nugget, some snickers and laughter and the joy of realizing you’re not the only one that ran into a head-scratcher.

Livestock keeping requires some research. It seems obvious, but it’s apparently not. It really merits researching in great depth, because there are a lot of investments and there are some

Imagine a gathering of 10,000 preppers at a convention somewhere in the heart of Las Vegas and at that convention every single prepper had brought their own fully stocked bug out bag. The same bug out bags that each person had diligently packed using checklists gleaned from various prepping blogs, YouTube videos and their own personal experience. I would bet that a high percentage of them, maybe 90% or greater would have one very simple piece of gear in there somewhere along with the fire-steel, water filters, emergency blankets and survival knives. They would all have a survival fishing kit.

The survival tin, which is usually the container for the survival fishing kit is I think one of the most discussed pieces of gear in prepper circles. A quick search on YouTube finds well over 100,000 videos of preppers showing the contents of their tins, opening up the survival tins they receive from internet shopping and discussing the range of life saving implements they have been able to squirrel away in the confines of these small boxes.

I think the survival tin is so popular for a couple of reasons. They are really simple to make, just grab an assortment of items that you think can help you out if you are ever faced with some life or death survival scenarios. All you need, generally speaking are items that many of us already have lying around our homes somewhere. I put the contents of a sample survival kit below.

Most of us can see the utility in having these items in our possession. The survival tin is designed to hold this potentially life-saving gear in a relatively compact form that is easy enough to slip in your pocket everyday as you head out the door. This is a mandatory part of many prepper’s EDC gear and I agree that if you had this in your pocket and were dumped in the middle of nowhere, next to a river at 0 Dark 30, you would be much better off than someone who had nothing. At least you could use the flashlight to see your way to using your flint and tinder to make a fire. Then you could take the survival fishing kit to catch a nice big trout for your sustenance. But for the rest of us who aren’t subjected to the life of a hypothetical Bear Grylls episode and aren’t dropped anywhere, does a survival fishing kit make much sense at all or is it wasting space in our bug out bags, backpacks and pants pockets? Is it giving you a false hope for food that might never materialize?

A survival fishing kit doesn’t have to be complicated or take up too much space.

Does it make sense to have a survival fishing kit in your Bug out Bag?

I am not a big fish eater to be perfectly honest, but I grew up fishing with my friends in the neighborhood where we lived. In our area we had two fairly decent sized lakes within a short walk through the woods. In these lakes, we caught plenty of brim, crappie, bass and even a catfish or two. I completely understand the rationale behind having a way to catch fish as food and if you get lucky, a decent sized fish or even several smaller fish could provide a nice meal which if you are starving, could save your life.

There are dozens of survival fishing kits already assembled.

But fishing isn’t just as simple as throwing a hook into the water. Along with that survival fishing kit, you need the right bait, a good bit of luck and a small amount of skill and patience. Come to think of it, a lot of hunting activities share those traits. I think that many preppers assume that if they only have that handy little survival fishing kit in their bags they will be bringing a feast back to the campsite with ease. This is yet another one of the myths that I think preppers believe about bugging out to the woods.

I think that having the ability to even try your hand at fishing during a survival situation is going to come down to several factors but the top two that come to mind are your location and your availability to fish. Are you bugging out where there are any lakes, ponds or rivers with fish in them? Are you on the move? Can you stop and risk the exposure of fishing? Can you afford to alert others with a fire and the smell of fresh fish cooking? How large is your group?

You might argue that the supplies you need for a good fishing kit are so small and insignificant when it comes to weight that they are good to have anyway. I can buy that, but I think that some people are hanging their hopes on their perceived ability to put food on the blanket and simply having some hooks, weights and fishing line in your survival tin doesn’t guarantee you will catch anything or even find a place to fish in the first place.

What goes into a good survival fishing kit?

The contents of a survival fishing kit are pretty basic and true to the survival tin idea, they don’t need to take up much space. Could you fashion your own hooks with a soda can tab or natural materials and leave the fishing kit at home? Sure but for the size and weight I would rather have the real thing. Fishing line is hard to replicate in nature and it really doesn’t cost much at all to put these supplies together.

A good survival fishing kit should have at a minimum:

  • 50 ft. of sturdy mono-filament fishing line. 20lb test or higher will reduce the chance of it breaking. You can use a stick to wrap your line around similar to how a kite string works.
  • Assorted hooks for the fish in your area
  • Bobbers or you can use any material that will float like a piece of Styrofoam or wood.
  • Sinkers
  • Fishing lures or fake worms, whatever works best for your area. If you don’t know just ask the guy behind the counter at the place you are buying the fish hooks.


If you have fishing supplies at home, this should be easy to pull together or if you would rather buy a pre-built kit they have plenty of survival fishing kits online and most are less than the price of a meal out. Knowledge of basic knots that won’t come undone easily will help you here also. It would really suck to finally catch a nice fish only to have the hook come off the line as you are nearing shore and your dinner swim away into the deep.

So what is my answer to the question I posed at the beginning? I think because they are so compact and could give you the ability to catch fish if the right situation presented itself, a survival fishing kit makes a good addition to your bag. I would only expect to be able to use this in certain situations/locations though and not as a reliable source of food for survival. It’s the same with snares and traps, they can catch game for you but you have to be incredibly lucky to have an animal wander through the woods to your trap in the first place so don’t bet the farm on these two methods unless you are already living remotely well before the collapse. These make good supplies to have in my opinion, but not realistic food gathering options unless you are extremely lucky in a bug out scenario. Once the dust has settled and you are all living like nomads, then a good fishing kit would be a great idea.

What do you think?

Imagine a gathering of 10,000 preppers at a convention somewhere in the heart of Las Vegas and at that convention every single prepper had brought their own fully stocked bug

Evaluating survival readiness takes more than just 13 questions. However these thirteen skills to learn in the areas of food, water, shelter, protection and communication will form a solid foundation of preparation and readiness.

1. Finding Food: The ability to locate wild game is essential for survival. This includes understanding habitats, wind direction and animal behaviour.

2. Preparing Food: There’s no need to cook a grasshopper but for other sources of protein, proper field dressing and cooking is needed to prevent disease and sickness.

3. Agriculture: Hunting won’t always be a viable option so you’ll need to know which crops you can grow, preferably without or with little irrigation, such as corn.

4. Food Storage: As the graphic displays, 53 percent of surveyed adults don’t have a minimum three-day supply of nonperishable food and water. Those without food storage will quickly find themselves in a dire situation.

Water is simple to store and transport with the right containers.


5. Finding Water: Water collecting contraptions can not only save you in the wilderness but will also work to replenish your water supply.

6. Purifying Water: There are plenty of ways to purify water, a common method (displayed) is a water filter made from pebbles, sand, cloth and charcoal.

7. Water Storage: The most important thing to remember about water collecting, purifying and storage is that you’ll only last 100 hours in average temperatures without water. An obvious survival priority.

8. Bug Out Ready: The effectiveness of bugging out is debated. However, it’s important to have a shelter that can withstand collapse.

9. Shelter Building: From round lodges to tarp shelters, shelter construction will protect you from the elements, preserving your energy and mental awareness.

10. Marksmanship: Accurately firing a weapon will help you take down food and can help you defend yourself and family. Being skilled with crossbows, compound bows and other weapons is a plus.

11. Weapon Maintenance: Cleaning the firearm thoroughly and frequently is important. And weapons like AR-15 rifles can be customized with different parts and accessories for hunting and protection purposes in survival situations.

12. Communication Methods: Cellphones could quickly become void in a survival situation. Understand technology and certain radios that will work under any condition.

13. Group Cohesion: The jerk test. Coexisting with others is the only way to survive for an extended duration.

Take a look through this infographic and let us know what you would add.

Evaluating survival readiness takes more than just 13 questions. However these thirteen skills to learn in the areas of food, water, shelter, protection and communication will form a solid foundation

If you do find yourself in the wilderness and need food, there are a lot of ways to fill the plate for dinner. Now, I will be the first to say that using primitive traps and the methods below are not the easiest thing in the world. People who rely solely on trapping food routinely have multiple traps, they aren’t the heaviest people in the world generally and often can go without food for a few days if they are unlucky to find nothing in their traps.

Actually, if you plan to Bug Out into the closest national forest with nothing more than your Bug Out Bag, your family and your trusty .22 rifle, I would not count on using these methods below as your sole source of food for a wide variety of reasons. To tell the truth, I wouldn’t recommend Bugging Out for any real reason unless you have zero other options or the risks of staying put are too great.

That being said, the methods below do work and have worked for a very long time. If you have the time, patience and are lucky enough to have an animal wander through your path, the traps below can be used to catch game and it is wise to have knowledge like this in your back pocket just in case.

Snares

Small-game snares can be made from the interior strands of parachute cord, braided strands of sinew, or fishing line. Snares stout enough to secure game as large as deer need to be made of rawhide or parachute cord. Of course if you have time to plan ahead, you can purchase snare traps now and put them in your bag.

Ground Snare

1. Ground Snare

Position the snare at head height and tie off the end to a tree, a stake in the ground, or a log that the animal can only drag a short distance as the noose tightens. Make snares from cord, fishing line, or wire if available. Very thin wire is probably the best for this type of snare I think because when tightened the wire doesn’t easily work itself loose. Paracord internal strands are much smoother and can slide off more easily.

A good place to position this snare (and a lot of them actually) is on a game trail. You have probably walked over hundreds of them if you have spent any time at all in the woods. The trick is to watch the ground floor and you can see trails. Set this snare up in a curve on the trail and cover the snare as much as possible with leaves to camouflage it.

2. Spring Snare
This snare functions by setting a trigger that snatches game into the air as it strains against the noose. It’s good for rabbits and game as large as deer. There are two main gotchas to remember with this trap. The first is that you want to choose a tree that will be both springy enough that it will spring back quickly enough to set the snare. This may be hard to do because the location of the snare will need to depend on what tree branches or trees are near.
The second thing to consider is if the branch is strong enough to hold whatever you are hunting for. Lets just say you are trying to catch a deer. You better choose a pretty beefy branch and make sure that your cordage will hold the full weight of an animal who will be trying very hard to get away if the impact from the branch swinging up hasn’t taken care of them pretty quickly. Also ensure that your rope is tied to the branch in such a way that it can’t easily be stripped off. If you don’t hoist the animal off their feet, they can pull against the cord. If the cord isn’t tight and wrapped around something that won’t allow it to slide off, you may have just given a bunny a new necktie. This will probably kill them later but you might not be there to enjoy the benefits and you might be out of your only snare materials.

Printed resource materials are always recommended in case the internet goes bye bye.

Deadfall Traps

Deadfalls that use logs or rocks to squash prey are typically baited, but they also work along trails or outside burrows when a passing animal or bird brushes against the trigger.

3. Spring Deadfall
One of the easiest traps to make and set, the spring deadfall depends upon the game going after the bait, so it’s best used for carnivorous animals and rodents such as pack rats. The only materials you need for this trap are a big heavy rock or a big log. Something big enough to crush the skull of the animal you are trying to trap. This has to be big enough to kill them pretty quickly.
If you have some bait, that will attract animals more quickly. You can set this up on an animal path, but waiting for someone to wander along might take a long time so bait is ideal. If you return and find the trap has been tripped, be careful removing the object that you used. It is possible the rock is just holding down the animal who could scurry off quickly after you raise the weight.

Tension Traps

Employing fire-hardened spear points under tension, these can be deadly to predator and prey alike. Always set and approach an impaling trap cautiously from behind and use only in an emergency in remote areas, where another human or domestic animals are not going to blunder past.

4. Spring Spear Trap
This trip-wire set is effective for wild pigs, deer, or other game that regularly sticks to defined game trails. Make certain the horizontal thrust of the spear is at a level that will impale the body of the game sought. This is an extremely dangerous trap; use it with caution.
The last thing you need to do if you are in the woods and are depending on spearing an animal for dinner is to jab a spear into your upper thigh or worse (gulp). Again, the choice of wood here is going to be important because the trap has to impale the animal with enough force to kill it while not letting it escape. If the trap is sprung you want the animal to still be there when you return.

Bird Traps

Birds can be much easier to trap than mammals and should be among your first targets for a meal.

Ojibwa Bird Pole

5. Ojibwa Bird Pole
Set this trap in a large clearing where birds will naturally seek it out as a landing place.

  • Step One Sharpen both ends of a 6-foot pole and drill a small hole near one end. Drive the other end into the ground until it is secure.
  • Step Two Cut a 6-inch-long stick that will loosely fit into the hole. Tie a rock to a thin cord and pass the cord through the hole in the pole, then make a slip noose that drapes over the perch.
  • Step Three Tie an overhand knot in the cord in back of the slip noose and place the stick against the hole. Tension should hold it in position. When a bird flies down and perches, it will displace the stick, the rock will fall, and its feet will be caught as the loop quickly slides through the hole.

Fish Traps

Fish swim next to banks at night or move from deep holes into shallow water to feed. They can often be directed into traps from which they are unlikely to escape.

Funnel Trap

6. Funnel Trap
Make the walls of the funnel trap with piled-up stones or tightly spaced sticks driven solidly into the river or lakebed. Close the entrance to the trap, roil the water, then either spear the fish or net them with a seine made by tying a shirt or other cloth between two stout poles.

This is one of the easiest traps to be successful with I think. I haven’t ever used it, but the logic seems to give you a much better chance of success provided you are near a water source and there are fish in there obviously. This is also one method used in the book “The Hatchet” which my kids really like. I think I liked it more than them, but regardless if fish are near, this is far easier than fishing. Seed the trap with whatever you can find for bait and the fish should file in for you. This is also great because if you are in the woods for a long time, a trap like this can keep bringing you fish and keep them alive until you are ready to eat them.

If you do find yourself in the wilderness and need food, there are a lot of ways to fill the plate for dinner. Now, I will be the first to

 

Deer hunting can be done in two ways; either by using rifles or using bows. If you are one of the many hunters who prefer the latter option, this is the perfect article for you to know the practice tips to hunt deer with a bow. Dedicated hunters will know that practice sharpens your skill on shooting a bow with precise and accurate shots. Thus, here are a few tips to pave your way to become a skilled bow hunter.

Practice during unfavorable conditions

Obviously, a good hunt is scheduled during the peak seasons when the weather is favorable for hunting and trekking. However, weather can be a greatly unpredictable thing, and while out on a hunt, it’s better to be prepared for anything.

Practicing in windy conditions where the direction and force of the wind can greatly affect your accuracy can improve your bow skills. Think of this way; if you can shoot well in crappy weather, then you can do so better in normal conditions. More importantly, you are prepared for any kind of situation when you’re out hunting.

Take it slow

If you’re planning to shoot your first buck from a tree stand, you cannot do so successfully without learning how to shoot from a higher position.

It’s not wise to push your limits while at the beginner stage of bow hunting. The best strategy to gauge your skills is to start slow. Start shooting at small distances until you can perfect your shot at that distance. Only then should you further increase the increments.

This strategy can also minimize frustration because it will let you know the farthest distance where you can shoot most accurately. On the field, it will help you gauge your Effective Kill Range (EKR), or the distance range wherein you are most likely to take down a deer without messing up the shot.

Learn how to use a bow sight

A bow sight is an essential tool when shooting long distance. The best bow sight can greatly enhance your long-distance shooting by a tenfold. Basically, it has pins set at different distances which can help you shoot long-distance targets from stagnant position, such as a tree stand.

Other than a bow sight, you should also use other essential bow accessories such as a bow stabilizer. A bow stabilizer, on the other hand, is an accessory that helps minimize torque, stabilize shots, and increase the accuracy of your shots.

Know how to shoot from a higher position

If you’re planning to shoot your first buck from a tree stand, you cannot do so successfully without learning how to shoot from a higher position. Because the trajectory will change once you shoot from an elevated place.

So one of my tips is to practice shooting dummy targets from a tree stand. Once you get a hold of this skill, you’ll find tree stand hunting an easy task.

Target for easy-kill areas

The most humane way to kill a deer is to shoot it in the chest area, where the arrow can pierce through the lungs or heart and deliver almost instant and painless death. To practice this skill, you can use target print-outs of a deer in order to enhance your ability to kill instantly.

Moreover, this will also minimize the possibility of the deer running away because of a shot in the belly, hind, or legs. With accurate shots to the chest area, you can harvest your kill easily.

Don’t hesitate to ask questions

If you’re not sure about something, ask a more experienced bow hunter than you. Remember that it’s not a competition of who is best. Every great bow hunter starts somewhere, and while you’re a beginner, it’s best to take advice from experts and use it to work on your weak points.

Other than constructive criticism, you can also form bonds with other bow hunters and potentially join them on their next bow hunt. This will be a big plus for you: because not only do you have new hunting buddies, you also have a lot of people to help you work on your skills.

Practice with your bow in low-light conditions

You can also master shooting with it during near sunset or near dawn conditions.

Most often, whitetail deer make an appearance before sunset when the light is dimming and your bow sight is getting difficult to use. Although most bow sights come with a glow-in-the-dark pin feature, it will be much wiser and a skill-builder to practice shooting in low light.

If you have a bow sight with a low-light feature, you can also master shooting with it during near sunset or near dawn conditions. In this way, you won’t need to fumble with your bow sight while on the field.

Adjust your bow according to the wind

The wind plays a big role in the accuracy of your shot because, as said before in this article, it can affect the direction and/or trajectory of your shot. When hunting deer with a bow, you’re also most likely confined to shooting from far distances. Therefore, it’s better if you learn to adjust your aim with the wind.

Most importantly, with this skill you can reap rewards when a supposed to be sunny day turns into a windy one. Remember: the weather is completely unpredictable, and as a hunter, don’t expect it to always be in your favor.

Work on your form

As a beginner, the best form for archery is one of the most difficult aspects to master. It’s imperative that you work on your form every time you practice shooting. Moreover, you can also ask an experienced bow hunter to evaluate your form and tell you the mistakes that you’re making.

Why does this need to be done? Well, a great form will directly affect the accuracy of your shot and help you shoot better. Otherwise, a bad form can lead to inaccurate and imprecise shots that will just leave you discouraged. Thus, remember to work on this aspect along with everything else.

Learn how to wait for the perfect shot

In deer hunting, timing is everything, whether you shoot with a bow or a rifle. The proper timing of your shot will decrease the chances of a botched kill. Since deer are highly receptive of sound, you can scare away a bunch of them if you have off timing with your shots and they end up on a nearby tree or the ground.

Unfortunately, the only way to practice your timing is to do it on an actual deer. Because automated practice targets have predictable movements, they aren’t great options for practicing timing. Unlike with deer, you can learn how to assess their movements and make it predictable to you.

Conclusion

Here, we’ve highlighted the best practice tips to hunt deer with a bow. It’s not the actual camping and hunting that’s the most difficult part, but the practice on shooting a bow. Thus, the best option you have in order to be the most prepared hunter in the world is to practice at every chance you get.

Did you like this article? If you did, leave us a comment below and tell us what you think. You can also share this with your friends. Thanks for reading!

  Deer hunting can be done in two ways; either by using rifles or using bows. If you are one of the many hunters who prefer the latter option, this is

When we talk about survival, there are certain items that immediately come to mind. We start with the discussion of beans, bullets and band-aids. This logically flows to having at least a 30 day supply of food, firearms and ammo to defend your home or retreat and medical instruments and supplies to take care of a variety of injuries in an emergency. This gets you the basics and then we talk about extending those provisions to last longer time periods, support more extreme scenarios or to include additional bodies.

On top of the basics, we have allowances for backup power, usually in the form of solar panels for long-term energy self-reliance or generators for short-term needs. Stored fuel is brought in to alleviate gas shortages or to extend our reach to our bug out locations or power generators. Gardens and raising small animals rounds off the discussions nicely.

What we seldom talk about though are the little survival items that people can forget. These are often the easiest to procure, least costly and seemingly simple items that a lot of you may have around your house already. If not, you might kick yourself if the SHTF and you were without some of these.

Oils for engines

Often overlooked is oils and lubricants. You may have 50 gallons of gas stored up for your generator, but do you have any oil? Generators or any two-cycle engines need oil to work, so it’s good to stock some away if you have to use any equipment. If you have used your generator, don’t forget to resupply. Not resupplying is a problem for many preppers (myself included) and is frankly stupid. You go through the pains of getting the supplies you need and a simple project around the house or camping trip requires some of those same supplies. It doesn’t matter if you have the world’s greatest first-aid kit. If it is empty of bandages because you used them to take care of cousin Bob when he split his head open at the last family reunion, you are screwed. If you use it, replace it.

Back to oil; make sure you have plenty for all of your equipment and more to share. This can be used for barter also and might help a neighbor out. If your neighbor has a tiller or chainsaw and you have the oil, you can make a deal.

Good boots

One of these days I will write a post about the best footwear for a survival situation, but for now let me simply state the importance of good leather boots. You need something that will protect your feet and hold up for a long time of abuse. Canvas hikers are really comfortable, but the soft soles wear quickly and a sharp stick can open them up. They may be great at wicking water, but if they are falling apart in 9 months of everyday use, are they really that great?

On the same subject, I see so many people nowadays running around in flip-flops. God forbid if something was to happen and you had to trek 40 miles over rough terrain. Good leather boots, maybe with steel toes will last a long time and can save your feet from a lot of pain. Redwing makes several great lines of boots and I believe they are still American made.

Maps

This should be a no-brainier but we as a society have relied less and less on maps because of our GPS enabled lives. You should have good quality road maps for the area around you or if you plan to bug out. I have a big road atlas in each car and anytime we go somewhere new I try to pick up a map. Another option is good topographical maps of your home town or retreat areas. You can get a lot of excellent maps at the USGS Topographic Map site.

Rope

Rope has millions of uses from tying down tarps to lashing poles together. I would get several different types of rope from nylon to hemp for different uses. Paracord shouldn’t be the only thing you buy. Along with purchasing rope you need to know how to tie a knot. A great site for learning important knots is Animated Knots by GROG where you can learn everything from a half-hitch to a Carrick Bend Mat.

Duct Tape

Like rope, duct tape has millions to the 12th power of uses. Buy several roles and don’t get the basic stuff meant for actual duct work. Splurge and get Gorilla tape. It will hold stronger than regular duct tape.

Spare Wood

Spare wood is one of those items that my wife hates. She simply can’t see the need to have a lot of pieces in various lengths, styles and shapes just sitting in the shed not doing anything. Having spare wood can come in handy though for a variety of situations. If you have to cover a door that was kicked in. it’s good to have a few sheets of plywood. Need to make a simple addition to your chicken coop to handle the growing flock? You could use some two by fours. Almost all wood can be used to build something. As an added bonus buy several boxes of nails to go along with that. 8D, 16d and finishing nails will knock out a lot of projects.

Hand tools

To compliment the spare wood, you need hand tools to go along with them. I am not talking about the kitchen “junk drawer” tools that everyone has; a little pink ball peen hammer, a crescent wrench and two screwdrivers. You need tools that will allow you to build something if there is no more electricity. I would purchase a good saw and some clamps, a very nice hammer, set of screwdrivers and wrenches.

Expanding on this you will likely need tools for your yard or garden. I can’t tell you how many rakes and shovels and wheel barrows we have been through because I bought the cheapest thing they had. Remember, there won’t be any Home Depot if the grid goes down so buy quality. You may cry now, but it’s better to buy one tool that lasts a lifetime. A decent shovel, axe and sledge-hammer will do thousands of chores.

Carry system

It’s much easier to have and practice with gear now than to try and create it later.

Moving on from household items, there are some considerations for if it really all goes bad and we are living in a WROL (without rule of law) scenario. All of the guns you have saved for need a home a proper holster is a minimum. If you only have a handgun, a quality leather holster is a great investment. It will keep your side arm on you at all times in an easily accessible position. If you are like me, I prefer a thigh-rig. This is for two reasons. First, I plan on wearing a vest and there isn’t room for the pistol. Secondly, I have two additional magazine pouches on the thigh rig so it keeps everything nice and neat.

I mentioned a vest. There are a lot of options for LBE (load bearing equipment) but I like the vest concept as a generally good solution for most situations. This allows me to hold 12 AR magazines, First Aid kit, radio and two additional pistol magazines right up front where I can reach them. There are lots of other options that work nicely, the point is you want to have something now to hold your stuff if the time comes when you need it. You don’t want to be the guy in the street sticking his Glock down his pants because he doesn’t have a holster.

Knee-pads

These are on every soldier that is deployed, every police officer in a tactical unit and pretty much anyone who knows what it feels like to take a knee on top of a good-sized rock. Knee pads will allow you to take cover with less injury to your knees. For about $15 you can protect your knees (which may be more sensitive than you know) from a lot of pain. Try sliding on your driveway behind the car with nothing but your pants on.

Camouflage

I am not recommending everyone suit up for battle, but camouflage is a great choice of clothing for a few reasons. It is great at concealment when hunting. For pattern, I would recommend the old Woodland camo pattern. You can pick these up cheaply on eBay or Craigslist or my personal favorite, the Army Navy store. Camouflage will help you blend into foliage if the time comes when you need to hide. I would also recommend a ghillie suit for extra credit, but you can make your own with burlap bags and some patience. I am sure you can imagine various reasons where having this would be preferable to your skinny leg blue jeans.

Backup Solar Power

Solar panel systems can be very expensive. If you plan to have enough solar panels to enable off-grid living you could be looking at well over 10K as an initial investment. There is a simpler option to get you by in a disaster though that won’t break the bank. There is a system called the Sunforce 50048 60-Watt Solar Charging kit that will get you basic power. Add this to four deep-cycle batteries and you can comfortably charge a good many electronics each day. If you have the system charged properly, you might even get away with running a fridge or freezer for a couple of hours too.

Bolt cutters

I’ll say this again that I don’t condone nor am I advocating stealing from anyone. However, there may be circumstances where this guideline doesn’t apply for various reasons. You have to make that choice. If the situation does dictate you needing to cut a lock, bolt cutters are a good, cheap option that are nice to have. You don’t have to use them on anyone else’s lock but yours if you like, but like insurance, you never know when you will need them.

I am sure others have plenty of ideas too. What items have you thought of to store?

When we talk about survival, there are certain items that immediately come to mind. We start with the discussion of beans, bullets and band-aids. This logically flows to having at

This guide will walk you through the basics of some simple ingredients you can add that will help take your compost to the next level.

But first, it’s important to eat a healthy meal before you get started. Let’s start with a healthy breakfast. Load up the coffee maker – a whole pot sounds just fine. Like tea instead? OK, make some tea then. Crack a few eggs and cook them up in any style you want, then put some whole wheat bread in the toaster. Serve that up on a paper plate, with paper napkins, since there’s no time for doing dishes – we’re composting today. Remember how your doctor always wants you eating your fruits and veggies? Go the extra mile! Peel a banana, de-stem some kale, and chop the tops off a few strawberries, put them in your blender and make a smoothie. Eat that up, and then we’ll get started.

Or have we already started? All of the items we just discussed in our healthy breakfast are also a part of a healthy compost pile. No, you don’t need to serve up those microorganisms with an omelet, but they would like those egg shells, and they’ll break down any leftover bread from your toast. In fact, if the loaf goes stale or moldy, you can throw the whole thing in your compost pile, turn it a few times, and you’ll have that to add to your garden. Coffee grounds, and the leftover coffee you didn’t drink, are also good food for them, as is tea (with or without the bag), and any leftover veggie products, like the kale stems or strawberry heads. You can add any paper goods, including your paper plate and your napkin (although you’ll want to start using the kind of paper plates that are not coated in a plasticc substance, as it will break down very slowly, if at all).

Compost is, essentially, a dirt and a fertilizer. All fertilizers in the US are rated using an NPK (nitrogen – phosphorus – potassium) scale. These are the three basic ingredients that help our plants to grow, and so it is essential that your soil has them – plants will use them up as they grow. Banana peels are extremely heavy in potassium, just as bananas themselves are full of potassium for humans. Coffee grounds contain significant amounts of nitrogen, and while egg shells are also nitrogen heavy, they contain a lot of calcium, which is as important for plants as it is for human bones. Speaking of bones, bone meal is the primary way of introducing phosphorus to your garden, although it is not recommended that you add too many to your compost, as residual meat attached to the bones will attract critters. You could add some manure to your compost, particularly horse manure, especially if you are already raising animals on your property.

Here are some additional tips for working items into your compost pile:

– My compost pile is not so much a compost “pile” as a compost bin collection. I have a pile for items that break down very slowly (woody plants, rotted planks of wood, cardboard, etc.), but my usual compost bin is a black garbage can I bought from the hardware store. With this, I don’t need to spend an hour digging in and turning my compost – I can simply ensure that the lid is on tight, turn my can sideways, and roll it around on my lawn a few times, and it will be well-mixed. The black color also ensures that my compost heats up quickly (all compost will get warm as things break down, but maintaining that heat makes it go quickly).

– Many gardeners like to sift their compost prior to using it. With a simple rectangular frame and a medium grain mesh material, you can create a sifter that will allow only the fully decomposed materials to fall out, while items that are not entirely done decomposing can be caught by the mesh and added back into your pile. Alternatively, you could just add the non-decomposed material to your garden and allow it to break down in place (there’s no magic to the pile, it just tends to be faster). The best method, in my opinion, is just to maintain multiple bins or piles, and allow the material to decompose over a longer period of time.

– When disposing of hard items, like those egg shells, if you blend them first in your blender with a little water, that will chop them up into little bits, which is ideal – the smaller the individual pieces of trash are, the faster they will decompose.

– Water, coffee, or tea is essential for a compost. It shouldn’t be drowning, but it should never be left dry. Coffee is a dessicant, so the liquid will not last long.

– If you’re tired of waiting around for your compost to decompose, and you feel like you need it quicker, bag the grass when you mow the lawn. Grass clippings make quick work of even the most durable and hardest-to-compost material. Don’t have grass? Add a bit of good garden soil, as it already contains many microorganisms, or a bit of compost from a bagged source. This will jump start your new pile. Many hardware stores offer a “quick start” powder you can add to your compost ingredients, and while it does work, it can be difficult to maintain the acceleration if your compost isn’t already balanced. Grass clippings are a much better alternative, because they are still quick, but they wear out over time instead of expiring quickly, and they’re free.

– Bugs are A-OK. Animals…not so much. Usually, animals will not be attracted to a compost pile unless there’s something in there that there probably shouldn’t be. Dairy products, like milk, eggs or cheese are fine in limited quantities, but if used in excess, will cause your compost to smell, which does tend to attract more bugs and animals. Meat products, while they will decompose and add some beneficial nutrients to soil, will attract raccoons and skunks, as well as other undesirable animals. That’s never a good idea.

– In the fall, instead of bagging the leaves that fall from the trees on your property, add them to a compost bin or pile. Leaves are slow to compost, but if added to a bin with heavy items inside, a simple rotation will break them apart. By mid-summer, these will be ready for use.

– Finally, like a balanced diet, you want a variety of items in your compost pile. Lettuces, grasses, cardboard, wood chips or shavings, sawdust, coffee grounds, dirt, fruit peels or leftovers, breads, knobby ends of zucchinis or other squashes, tomato stems, weeds, expired blossoms, and pretty much any other organic (once-living) landscape material are good additions.

This guide will walk you through the basics of some simple ingredients you can add that will help take your compost to the next level. But first, it’s important to eat